0 Items In Your Cart View CartCheckout
Home
Products
How It Works
FAQ
Order Status
Testimonials
Contact
HOW DOES IT WORK
When brass is new it has a profile like the drawing on the left. After being used, the brass begins to take on a new shape similar to the right (this drawing is exaggerated for clarity). The force of the explosion causes the base of the case to expand. This also has the effect of shortening the over all case length. These changes in the case profile may cause the case to chamber improperly slowing or binding mechanisms. The changes may become so severe that the brass will not chamber at all. Case-Pro 100 restores brass to allow it to be used again.
When the Case Transfer Bar drops a piece of brass into Case-Pro for reprofiling it starts in the position shown to the left. When you pull the Operating Handle forward, both the Slide and the casing move toward the front of Case-Pro. As the Back Up Forming Rail moves, the forming edge catches under the bulge on the case. As the Back Up Forming Rail continues to move forward, the Forming Edge moves the bulge toward the top of the case as shown in the middle drawing. At the same time, the fixed Forming Rail contains the correct case profile and forces the brass to accept that profile. By the time you have finished pulling the Operating Handle forward the bulge has been moved upward to the point where your sizing die can completely remove it!
Current Lead Time
2-3 MONTHS FOR MACHINES. DIES AND COMPONENTS STILL AVAILABLE PLEASE ORDER ONLINE OR CONTACT US FOR LEAD TIME
Reserve Yours Now

Benefits
  • Resizes Brass Back To Spec
  • Removes Brass Bulge
  • Eliminates Needing Case Lube
  • Unmatched Craftsmanship
  • Limited Life Time Guarantee
  • 100% Made In U.S.A.


  • Copyright 2017 Case-Pro 100